Radon Mitigation And Radon Systems

Radon is a contaminant that can cause lung cancer, bone cancer, and leukemia in adults. It is most dangerous when there is a buildup within the upper respiratory tract or in the bone marrow.There are many different ways to get radon mitigation accomplished. For homes, there are traditional types of radon mitigation which are sealing up the radiators, building concrete walls and ceilings to prevent the radon from entering, using commercial sealers and exhaust systems to improve the quality of air, and reducing the amount of air that is leaking through cracks in the foundation and wall.

For commercial facilities,there are radon mitigation methods that use containment devices to stop radon from getting into the building.There are three types of tools that are used for radon mitigation, including penetration depth detectors, sub wall enclosures, and vent fans.The penetration detectors are used to check whether radon protection has been installed. This is done by sending a high energy pulse through the floor, soil, or wall to get an estimate of the area where radon might be present.

The sub wall is a seal between the floor and the absorbent layer, sealing it off from air leaks. The enclosure is an enclosed space that protects the walls and ceiling from air leakage, protecting the floors, ceilings, and radon-proof appliances like heaters and air conditioners.The third option is the gas ventilation fans, which are designed to distribute fresh air across the ventilation pipes. These types of radon mitigation systems have been proven to reduce the levels of radon found in indoor air.

No matter what type of radon mitigation you choose, make sure that you get a licensed contractor to do the work. You can have a qualified company to carry out the installation on your behalf, but if the work is done by an untrained individual, you could be liable for health problems. Also, be sure that your certified contractor can provide you with a written agreement that sets out the terms of the radon mitigation work they will be doing.Once the radon mitigation system is installed, it should be tested regularly to ensure that it is working correctly. Before your work is completed, it should also be tested for radon concentration to make sure that you have achieved the level of protection you need.

If the radon mitigation is done in accordance with new technology and accepted industry practices, there is a good chance that it will effectively remove the radon from your home. The standard recommended level for radon is 0.3 milligrams per cubic meter of air.The only other method of radon mitigation that can work is the self-contained systems, which may include metal cabinets, a sealed duct system, sub-surface cartridges and a whole house filtration system. These are not generally as effective.There are many radon mitigation products available to you, so make sure that you do your research to find one that will fit your needs.